- New
- On sale!
Characteristics | |
Motorcycle Tire Balancing Device with Adjustable Feet and Spirit Level is used to balance motorcycle tires. The balancing device for motorcycle tires comes with a set of clamping shafts and cones. The clamping cones have a conical shape, so that the motorcycle tire is always centered. It's convenient and effective! With the tire balancer, you can quickly determine where the tire is heavier and where it is not (imbalance). The diameter of the shaft is 12 mm, the cone is 15 mm. at its narrowest and 35 mm. at its widest point. The width of the rim you can tighten is 9 inches. | |
Setting up the balancing device | |
First, lay the balancing device on a flat surface, if not, the balancing device can be adjusted using feet. Thanks to the spirit level, you can immediately see whether the device is straight or not. Next, slide the axle into the rim and tighten the clamping cones (Allen 3mm, not included). Once the clamping cones are tightened, place the axle with the drive tire on the balancer. By turning the tire slightly, you will quickly realize whether the tire has been properly balanced or not. The heavy part of the tire will go down and the light part will go up. The light part of the tire can be adjusted with lead tape. Counsel | First, secure the adhesive thread with tape. The tape adheres well to the rims, saving you time and money. Once you've found the right weight, glue the plumb line. |
Specific References